Ducati Monster S2R 800

DUCATI MONSTER S2R 800
SHOCK ABSORBER AB2 MOUNTING INSTRUCTION
* The drawing is purely indicative
Seat
A
Lateral fairing
B
Rear lights
fairing
H
Original screw
C
Collar
F
Plastic wrapper
H
Spacer
E
Screw M6X35+washer
D
Collar screw
G
Mounting instructions:
1. Remove the seat “A” and the lateral fairing “B” from the bike.
2. Remove the original screw “C” that fix the rear lights fairing “H”at the bike frame.
3. Fix the rear shock collar “F” using the screw M6X35+washer “D” and spacer “E”.
4. Mount the shock absorber reservoir into the collar “F” and fix it tightening the collar screw “G”.
5. To avoid the contact between the reservoir tube and other parts of the bike, fix the tube with a plastic wrapper “H” at the
bike frame.
6. Reassemble the lateral fairing “B” and the seat “A”.
All of the operations of installation and dismounting, must be carried
out strictly by a specialised workshop.
Mupo cannot be held responsible for damage to products or persons
caused by incorrect installation or product tampering.
To install Mupo products, please follow the manufacturers
workshop manual instructions.
Before attempting to fit or remove any parts, protect the
motorcycle from possible damage.
MADE IN ITALY
Mupo Srl via dell’Artigianato 34, 40023 Castel Guelfo – Bologna (Italy) Tel. +390542671860 Fax. +390542671858 www.mupo.it – [email protected]