Curriculum - swas.polito.it

CURRICULUM VITAE
of Prof. Luca Settineri
Home address:
Via della Rocca, 24 bis
10123 TORINO, Italy
Professional address:
DIGEP-Politecnico di Torino
C.so Duca degli Abruzzi, 24
10129 TORINO, Italy
Tel. +39 011 0907230
Fax +39 011 0907299
Mobile +39 331 6923932
e-mail [email protected]
Current Role:


Full Professor of Manufacturing
Head of the Department of Management and Production Engineering of the Politecnico
di Torino, Italy
General information and main professional experience:






-
1988: Master of Science Degree Magna cum Laude in Mechanical Engineering from the
University of Palermo, with a thesis on interrupted cutting.
1990 to 1994: Researcher of the ILM – CNR (Institute for Metal Machining of the
National Research Council).
1994: PhD in Production Engineering with a thesis on Monitoring and Control of
Machine Tools.
1994 - 2000: Assistant Professor of Manufacturing in the Department of Production
Systems and Economics of the Politecnico di Torino.
2000 - 2010: Associate Professor of Manufacturing in the Department of Production
Systems and Economics of the Politecnico di Torino.
From January 2011: Full Professor of Manufacturing in the Department of Management
and Production Engineering of the Politecnico di Torino.
Fellow Member of CIRP (International Academy for Production Engineering)
Member AITEM (Italian Association for Manufacturing Technology)
Member ATA (Autovehicle Technical Association)
Foreign languages:
Italian mother tongue, fluent English, fluent French, elementary Spanish, elementary German.
Teaching activities:

1994 – to date: Courses of “Manufacturing technologies”, “Manufacturing cycles”,
“Fabrication techniques”, “Product Industrialization” “Analysis and Management of
Production Systems” and “Sustainable Manufacturing” for the Politecnico di Torino,



the University of Palermo, the University of Bolzano, the Universitè Catolique de
Louvain La Neuve and the Tongji University of Shanghai.
2008 – to date: Teacher of the Courses of Manufacturing and of Computer Assisted
Manufacturing for the Sino-Italian Campus PoliTong, situated in the Tongji University
of Shanghai.
2002 – to date: Member of the teaching board of the Doctorate in Management,
Production and Design.
2004 - to date: Teacher of the Doctoral Courses “Advanced coatings for anti-wear
applications”, “Advanced Manufacturing Systems and Processes”, “Production
Systems”, “Elements of Green Manufacturing”.
General Organization and Management Activities





1998 - 2000: Member of the Board of Directors of the Politecnico di Torino.
2005 – 2010 and 2015-2019: Member of the Academic Senate of the Politecnico di
Torino.
2008 – 2012: Coordinator of the Sino-Italian Campus of Politecnico di Torino in the
Tongji University of Shanghai.
2010-to date: Coordinator of the Doctoral Program in Management, Production and
Design of Politecnico di Torino.
2015-2019: Head of the Department of Management and Production Engineering of
Politecnico di Torino.
International Experiences and Internationalisation










1992: Visiting Student at the University of Michigan in Ann Arbor, USA, 12 months.
1994: Invited Scientist at the University of Michigan, 1 month.
1996: Visiting Scientist at IKP (Research Institute on Polymeric Materials) of the
University of Stuttgart, 2 months.
1997 - 2003: Responsible of the Mechanical Engineering Council of the Politecnico di
Torino for the International Relationship and for Student and Teachers exchanges.
2003: Visiting Professor in the Universitè Catolique de Louvain La Neuve, 3 months.
2005 to date: Member of the Internationalization Staff of the Politecnico di Torino.
2007-2010: Coordinator of the Mechanical and Production Engineering Program for the
Sino-Italian Campus PoliTong, with the Tongji University of Shanghai, China.
2010 – 2012: Operating Manager of the PoliTong Project for Politecnico di Torino.
2012-to date: Responsible for the International Exchanges of the Department of
Management and Production Engineering of the Politecnico di Torino.
2008, 2010, 2012, 2014: Visiting Professor at Tongji University of Shanghai, China, in
total 14 months.
Reaserch Related Coordination Activities:



2002 to date: Member of the Scientific Committee of the Laboratory on Machine Tools
of the Politecnico di Torino
2003 - 2008: Coordinator of the research activities of the ISTEC-CNR (Institute for
Science and Technology of Ceramic Materials of the National Research Council), site
of Torino.
2006 to date: Member of the Board of the Piedmontese Section of the Autovehicle
Technical Association.












2007: Organiser of the Workshop on Machining tools and technologies, held in Torino,
February 22nd, 2007.
2007-to date: Founder and Coordinator of the Section “Machining” of the Italian
Association of Manufacturing Technology.
2007-2010: Vice-coordinator of the Doctorate in Industrial Production Systems
Engineering.
2007: Member of the International Scientific Committee of the 10th CIRP International
Workshop on Modeling in Machining Operations, Reggio Calabria, Italy, 27-28 August
2007.
2008: Organiser of the Workshop on Machining tools and technologies, held in Torino,
February 19th, 2008.
2008: Member of the International Scientific Committee of the 11th CIRP Conference
on Modelling of Machining Operations, Gaithersburg MD, USA, 16-17 September
2008.
2008: Member of the International Scientific Committee of the 7th “THE” Coatings
International Conference, Kassandra-Chalkidiki, Greece. 1-3 October 2008.
2009: Member of the Scientific Board of the 9th AITEM Conference, Torino, Italy,
September 7th-9th, 2009. Organiser of the Workshop
2010: Member of the International Scientific Committee of the 4th International
Conference on “Sustainable Energy & Environmental Protection”, Bari, 29 June – 2
July 2010.
2012: Member of the International Scientific Committee of the PROMED - 1st
International Conference on Design and PROcesses for MEdical Devices, Padenghe sul
Garda - Brescia - Italy - May 2-4, 2012.
2013: Chairman of the 14th CMMO – CIRP Conference on Modeling of Machining
Operations, Torino, June 13-14, 2013.
2014: Member of the International Scientific Committee of the 11th “THE” Coatings
International Conference, Thessaloniki, Greece. 1-3 October 2014
Management of Funded Research Projects




National and Regional Projects
2003-2005: coordinator of 4 Industrial Regional Research Projects, on the development
of innovative cutting tool materials and coatings for difficult machining operations, in dry
and MQL conditions. Total Budget: € 100.000.
2006-2008: coordinator of the activities of ISTEC-CNR for the project NANOMAT,
(Nanomaterials and their applications). Total Budget: € 6.000.000; Budget of ISTEC: €
470.000.
2007-2010: coordinator of the activities of ISTEC-CNR for the project Micromachining,
funded by the Ministry of University and Research. Total budget: €1.100.000; Budget of
ISTEC: € 138.000.
2008-2009: Coordinator of the research projects: “Analysis of the value chain for the
made in italy luxus products”, and “Technology, innovation and design in Piedmont:
borderless organization and adaptive enterprise” funded with two Lagrange Grant of the
Cassa di Risparmio Foundation of Torino; Total budget: €40.000.




2009-2012: Coordinator of the Lab ECOPROLAB, in the framework of the project
“GREAT 2020” (GReen Engine for Air Transport in 2020), funded by the Region
Piedmont. Total budget: €5.000.000,00; Budget of the Unit: € 125.000,00.
2009-2012: Coordinator of the Research Unit of Torino of the project PROTIAL
(Developing a new concept for optimal production and machining of aerospace
components in TiAl), funded by the Region Piedmont. Total budget €1.800.000,00;
Budget of the Unit: € 270.000,00.
2010-2013: Coordinator of the Research Unit of Torino of the project LAVOECO
(Sustainable manufacturing of thermo-resistant alloys for aerospace applications),
funded by the Region Piedmont. Total budget €1.925.400,00; Budget of the Unit: €
270.000,00.
2010-2012: Coordinator of the Research Unit of Torino of the project PROCOPAFO
(Continuous Process for Photovoltaic Panels), funded by the Region Piedmont.
Total budget €476.439,66; Budget of the Unit: € 77.886,16.

2011-2015: Coordinator of the Research Unit of Torino of the project FLEX-PROD
(Flexible Production), funded by the Ministery of Economic Development. Total
budget €4.929.850; Budget of the Unit: € 141.061,01.







2012-2015: Coordinator of the Research Unit of Torino of the project OPTADI
(Ottimizzazione del processo di produzione e dei sistemi di lavorazione di particolari in
ghisa duttile austemperata (ADI) per l’industria dei trasporti), funded by the Region
Piedmont. Total budget € 1.163.876; Budget of the Unit € 114.719,40.
European and International Projects:
2000-2003: Coordination of the Unit of Torino in the framework of the EU project
“NACODRY” (Dry stamping and dry machining of difficult to-cut materials by means of
Superhard Nanocomposite Coatings).
Partner Budget: € 446.000,00.
2001-2004: Coordination of the Unit of Torino in the framework of the EU project
“KNIWOOD” (Innovative and efficient Knives surfaces modification in first
transformation of wood, chipper centre and peeling machine).
Partner Budget: € 80.000,00.
2001-2004: Coordination of the Unit of Torino in the framework of the EU project
“COMING DRY” (Organic matrix composites and inconel alloys: improvements in their
machining under low coolant flows and dry conditions).
Partner budget: € 347.700,00.
2001-2005: Coordination of the Unit of Torino in the framework of the EU project
“MANTYS” (Thematic Network on Manufacturing Technologies).
Partner budget: € 28.000,00.
2002-2004: Coordination of the Unit of Torino in the framework of the EU CRAFT
“LOTHISS” (Low temperature near-net powder metallurgy route for the manufacture of
complex shaped wear resistant parts).
Partner budget: € 190.000,00.
2005-2007: Participation to the EU STREP Project “VERDI” (Virtual Engineering for
Robust manufacturing with Design Integration), in the “machining simulation” group of
Politecnico di Torino.
Partner budget: € 37.000,00


2008-2011: Coordinator of the Unit of Torino in the framework of the EU Project
“APPLICMA” (Development of wear resistant coatings based on complex metallic alloys
for functional applications).
Partner budget: € 281.000,00.
2009-2012: Coordinator of the Research Unit of the Politecnico di Torino of the Project
NANOTOOLGA (Nanocoating tools for Gamma titanium aluminide alloys
machining), funded by the European Union. Total budget: €1.050.000,00.
Partner budget: € 90.000,00.

2012-2015: Coordinator of the Research Unit of the Politecnico di Torino of the Project
“Advanced ultra-hard Nanostructured Coatings for innovative applications in mechanical
and chemical industries”, funded by the Qatar National Research Fund. Total budget:
€1.035.393,00. Partner budget: € 92.500,00.
Research products:
Prof. Settineri is author or co-author of more than 160 printed papers published on national
and international journals and on the proceedings of national and international conferences on
the following main subjects:
1) Manufacturing processes and technologies, with particular references to machining
processes and coatings;
2) Rapid Prototyping;
3) Alternative joining techniques;
4) Sustainability in Manufacturing
List of Publications:
Papers published on International Journals
IJ 1.
IJ 2.
IJ 3.
IJ 4.
IJ 5.
IJ 6.
IJ 7.
J.J. Park, L. Settineri, “Cutting Torque Estimation using Spindle Power
Measurements”, Transactions of XXI NAMRI-SME, Evanston, Illinois, pp. 8590, ISBN 0 87263 450 7, 25-27 may 1994.
A. Masnata, L. Settineri, “An Application of Fuzzy Clustering to Cellular
Manufacturing”, Int. J. of Prod. Research, Vol. 35, N° 4, pp. 1077-1094, 1997.
A. Lombardo, A.Masnata, L.Settineri, “In-Process Tool Failure Detection by
means of AR Models”, Int. J. Adv. Manuf. Technol., Vol. 13, pp. 86-94, 1997.
S.D. Bianchi, S. Tornincasa, L. Settineri, A. Lojacono, G. Ramieri: “3D
Morphological and Dimensional Follow-up of Maxillary Bones Solid Replicas”,
Journal of the International Association of Dentomaxillofacial Radiology,
Volume 27, Supplement 1, June 1998.
L. Iuliano, L. Settineri, A. Gatto: “High-Speed Turning Experiments on Metal
Matrix Composites”, Composites Part A, pp.1501-1509, Vol. 29A, number 12,
ISSN 1359-835X, Elsevier, 1998.
R. Ippolito, L. Settineri. A. Barcellona, F. Micari: "Numerical and Experimental
Optimisation of the Clinching Process", Transactions of XXVII NAMRI-SME,
ISBN 0-87263-510-4, Berkeley, California, pp. 49-54, 25-28 Maggio 1999.
F. Franceschini, L. Settineri: “Control Charts for the On-Line Diagnostics of
CMM Performances”, Intern. Jou. of Computer Integrated Manufacturing, Vol.
13, n° 2, pp.148-156, ISSN 0951-192X, 2000.
IJ 8.
IJ 9.
IJ 10.
IJ 11.
IJ 12.
IJ 13.
IJ 14.
IJ 15.
IJ 16.
IJ 17.
IJ 18.
IJ 19.
IJ 20.
D. Antonelli, L. Settineri: “FEM Simulation of Clinched Joints Behaviour”
Transactions of XXIX NAMRI-SME, ISBN 0-87263-600-3, Gainesville, Florida,
pp. 35-41, May 22-25 2001.
F. Franceschini, M. Galetto, L. Settineri: “On-Line Diagnostic Tools for CMM
Performance” Int. Journal of Advanced Manuf. Technology, Vol. 19, pp. 125130 ISSN: 0268-3768, 2002.
G. N. Babini, A. Fedele, L. Settineri: “SFF of Ceramic Parts: Literature
Overview and Direct Experiments”, in Materials Issues in Solid Freeforming,
edited by S. Jayasinghe, L. Settineri, A.R. Bhatti, and B-Y. Tay (Mater. Res.
Soc. Symp. Proc. 860E, Warrendale, PA , 2005), paper n. LL 4.1, electronic
publication.
DOI: http://www.mrs.org/members/proceedings/fall2004/ll/LL4_1.pdf
E. Atzeni, R. Ippolito, L. Settineri: “Experimental and Numerical Investigation
on Self-Piercing Riveting”, Transactions of XXXIII NAMRI-SME, ISBN 087263-777-8, ISSN 1047-3025, New York City, NY, pp. 477-484, May 24-27
2005.
S. Spriano, Q. Chen, L. Settineri, S. Bugliosi: “Low Content and Free Cobalt
Matrixes for Diamond Tools”, Wear, Volume 259, Issues 7-12, July-August
2005, pp. 1190-1196, ISSN 0043-1648.
L. Settineri: “Surface properties and Performance of Multilayer Coated Tools in
Turning Inconel”, Annals of the CIRP, Vol 54/1, 2005, pp. 515-518, ISBN 3905 277-43-3, ISSN 007-8506 (CIRP Annals), ISSN 1660-2773 (CIRP Annals,
CD-Rom), 2005.
L. Settineri, M.G. Faga: “Laboratory Tests for Performance Evaluation of
Nanocomposite Coatings for Cutting Tools”, Wear, Vol. 260, issue 3, February
2006, pp 326-332.
M.G. Faga, L. Settineri: “Innovative anti-Wear Coatings on Cutting Tools for
Wood Machining”, Surface and Coatings Technology, Vol. 101, Issue 6,
december 2006, pp. 3002-3007, ISSN 0257-8972.
L. Filice, D. Umbrello, F. Micari, L. Settineri: “On the Finite Element
Simulation of Thermal Phenomena in Machining Processes”, Advanced
Methods in Materials Forming, Vol. XX, 2007, Springer, ISBN: 978-3-54069844-9, pp. 273-288, volume edited by Banabic.
L. Filice, F. Micari, L. Settineri, D. Umbrello: “Wear Modelling in Mild Steel
Orthogonal Cutting when using Uncoated Carbide Tools”, Wear 262 (2007) pp.
545–554.
D. Umbrello, L. Filice, S. Rizzuti, F. Micari, L. Settineri, (2007), "On the
effectiveness of Finite Element simulation of orthogonal cutting with particular
reference to temperature prediction", Journal of Material Processing
Technology, Vol. 189/1-3, pp. 284-291, ISSN: 0924-0136 ELSEVIER
SCIENCE SA.
E. Atzeni, R. Ippolito, L. Settineri (2007), “FEM Modeling of Self-Piercing
Riveted Joint”, Key Engineering Materials, ISSN: 1013-9826 , Vol. 344 pp.
655-662. Presentato a SHEMET 2007, 1-4 aprile, Palermo.
M.G. Faga, G. Gautier, R. Calzavarini, M. Perucca, E. Aimo-Boot, F.
Cartasegna, L. Settineri, “AlSiTiN nanocomposite coatings developed via Arc
Cathodic PVD: evaluation of wear resistance via tribological analysis and high
speed machining operations”, Wear 263 (2007) pp. 1306–1314.
IJ 21.
IJ 22.
IJ 23.
IJ 24.
IJ 25.
IJ 26.
IJ 27.
IJ 28.
IJ 29.
IJ 30.
IJ 31.
L. Settineri, F. Bucciotti, F. Cesano, M.G. Faga: “Surface Properties of
Diamond Coatings for Cutting Tools”, Annals of the CIRP, 2007, Vol 56/1, pp.
573-576, ISBN 3-905 277-43-3, ISSN 007-8506 (CIRP Annals), ISSN 16602773 (CIRP Annals, CD-Rom).
L. Settineri, M.G. Faga, B. Lerga: “Properties and Performances of Innovative
Coated Tools for Turning Inconel”, International Journal of Machine Tools and
Manufacture, vol. 48, issues 7-8, june 2008, pp. 815-823, ISSN: 890-6955, IN
PRESS, DOI http://dx.doi.org/10.1016/j.ijmachtools.2007.12.007.
L. Settineri, M.G. Faga, B. Lerga: “Nanostructured Cutting Tools Coatings for
Machining of Titanium”, Machining Science and Technology, Vol 12/2, April
2008, pp. 158-169, ISSN: 1532-2483 (electronic) 1091-0344 (paper). DOI:
10.1080/10910340802067239.
L. Settineri, M.G. Faga, G. Gautier, M. Perucca: “Evaluation of Wear
Resistance of AlSiTiN and AlSiCrN Nanocomposite Coatings for Cutting
Tools”, Annals of the CIRP, 2008, Vol 57/1, pp. 575-578, ISBN 3-905 277-433, ISSN 007-8506 (CIRP Annals), ISSN 1660-2773 (CIRP Annals, CD-Rom),
DOI http://dx.doi.org/10.1016/j.cirp.2008.03.103.
D. Contorno, M.G. Faga, L. Fratini, L. Settineri, G. Gautier di Confiengo:
“Wear analysis during Friction Stir Processing of A359+20%SiC MMC”, Key
Engineering Materials, ISSN: 1013-9826 , Vols. 410-411 pp. 235-244.
Presentato a SHEMET 2009, aprile, Birmingham.
E. Atzeni, R. Ippolito, L. Settineri: “Experimental and Numerical Appraisal of
Self-Piercing Riveting”, Annals of the CIRP, 2009, Vol. 58/1, pp. 17-20, ISBN
3-905 277-43-3, ISSN 007-8506 (CIRP Annals), ISSN 1660-2773 (CIRP
Annals, CD-Rom).
M.G. Faga, R. Mattioda, L. Settineri: “Microstructural and Mechanical
Characteristics of Recycled Hard Metals for Cutting Tools”, Annals of the
CIRP, 2010, Vol. 59/1, ISBN 3-905 277-43-3, ISSN 007-8506 (CIRP Annals),
ISSN 1660-2773 (CIRP Annals, CD-Rom).
L. Settineri, E. Atzeni, R. Ippolito: “Self Piercing Riveting for Metal-Polymer
Joints”, Int. Journal of Material Forming, April 2010, ISSN 1960-6206 (Print)
1960-6214 (Online), Vol. 3 Suppl 1:995-998 DOI 10.1007/s12289-010-0937-3
Springer-Verlag – France.
S. Rizzuti, D. Umbrello, L. Filice, L. Settineri: “Finite element analysis of
residual stresses in machining”, Int. Journal of Material Forming, April 2010,
ISSN 1960-6206 (Print) 1960-6214 (Online), Vol. 3 Suppl 1:431-434 DOI
10.1007/s12289-010-0799-8 Springer-Verlag – France.
F. Klocke, S. Rizzuti, P. Frank, K. Gerschwiler, D. Lung and L. Settineri:
“Experimental and numerical investigation on the delamination behaviour of
PVD-coated tools in turning of austenitic steel”, Int. Journal of Material
Forming, April 2010, ISSN 1960-6206 (Print) 1960-6214 (Online), Vol. 3 Suppl
1:435-438 DOI 10.1007/s12289-010-0800-6 Springer-Verlag – France.
P.C. Priarone, S. Rizzuti, G. Rotella, L. Settineri: “Technological and
environmental aspects in milling of -TiAl”, Advanced Materials Research Vol.
223 (2011) pp 340-349, Trans Tech Publications, Switzerland.
DOI:10.4028/www.scientific.net/AMR. 223.340. ISSN 1332-8985.
IJ 32.
IJ 33.
IJ 34.
IJ 35.
IJ 36.
IJ 37.
IJ 38.
IJ 39.
IJ 40.
IJ 41.
A. Tsouknidas, L. Settineri , P. Arrazola, N. Michailidis, “Wear-Related
Phenomena in Advanced Materials”, Editorial, Advances in Tribology, Volume
2011 (2011), Article ID 842686, 2 pages doi:10.1155/2011/842686.
P.C. Priarone, S. Rizzuti, G. Rotella, L. Settineri, “Tool wear and surface quality
in milling of a gamma-TiAl intermetallic”, Int J Adv Manuf Technol Vol. 61
(2012) pp. 25–33 DOI: DOI 10.1007/s00170-011-3691-x.
P.C. Priarone, S. Rizzuti, L. Settineri, G. Vergnano (2012): “Effects of cutting
angle, edge preparation, and nano-structured coating on milling performance of
a gamma titanium aluminide”, Int. J of Material Processing Technology, Vol.
212, pp. 2619-2628, http://dx.doi.org/10.1016/j.jmatprotec.2012.07.021.
F. Klocke, D. Lung, M. Arft, P.C. Priarone, L. Settineri (2013):” On high speed
turning of a third generation gamma titanium aluminide”, Int J Adv Manuf
Technol Vol. 65 (2013) pp. 155-163, DOI: 10.1007/s00170-012-4157-5.
F. Klocke, L. Settineri, D. Lung, P.C. Priarone, M. Arft, (2013): “High
performance cutting of gamma titanium aluminides:influence of lubricoolant
strategy on tool wear and surface integrity”, Wear, Vol. 302 (2013) pp. 11361144, DOI information: 10.1016/j.wear.2012.12.035.
G. Rotella, O.W. Dillon Jr., D. Umbrello, L. Settineri, I.S. Jawahir (2013):
“Finite element modeling of microstructural changes in turning ofAA7075-T651
Alloy”, Journal of Manufacturing Processes, Vol. 15, Issue 1, January 2013,
Pages 87–95, http://dx.doi.org/10.1016/j.jmapro.2012.09.005.
P.C. Priarone, S. Rizzuti, S. Ruffa, L. Settineri (2013): “Drilling experiments on
a Gamma Titanium Aluminide obtained via Electron Beam Melting”, Int. J. of
Adv. Manuf. Technol., Vol. 69, pp. 483-490: DOI: 10.1007/s00170-013-5050-6.
G. Rotella, O.W. Dillon Jr., D. Umbrello, L. Settineri, I.S. Jawahir (2014): “The
effects of Cooling Conditions on Surface Integrity in Machining of Ti6Al4V
Alloy”, Int. J. of Adv. Manuf. Technol., Vol 71, pp 47-55, DOI: 10.1007/s00170013-5477-9.
K.D. Bouzakis, E. Bouzakis, S. Kombogiannis, S. Makrimallakis, G. Skordaris,
N. Michailidis, P. Charalampous, R. Paraskevopoulou, R. M’Saoubi, J. C.
Aurich, F. Barthelmä, D. Biermann, B. Denkena, D. Dimitrov, S. Engin, B.
Karpuschewski, F. Klocke, T. Özel, G. Poulachon, J. Rech, V. Schulze, L.
Settineri, A. Srivastava, K. Wegener, E. Uhlmann, P. Zeman (2014): “Effect of
cutting edge preparation of coated tools on their performance in milling various
materials”, CIRP Journal of Advanced Manufacturing Science and Technology,
Volume 7, Issue 3, 2014, Pages 264–273, ISSN: 1755-5817. DOI:
10.1016/j.cirpj.2014.05.003
L. Settineri, P.C. Priarone, M. Arft, D. Lung, T. Stoyanov (2014): “An
evaluative approach to correlate machinability, microstructures, and material
properties of gamma titanium aluminides”, CIRP ANNALS – Manufacturing
Technology, 2014, Vol. 63/1, ISBN 3-905 277-43-3, ISSN 007-8506 (CIRP
Annals),
ISSN
1660-2773
(CIRP
Annals,
CD-Rom),
DOI
10.1016/j.cirp.2014.03.068.
IJ 42.
I. Forno, P.C. Priarone, L. Settineri, M. Actis Grande: “Surface characterization
and machinability of Zirconium alloys in view of jewelry application”,
Advanced Materials Research Vols. 941-944 (2014) pp 18-25,
doi:10.4028/www.scientific.net/AMR.941-944.18.
IJ 43.
IJ 44.
IJ 45.
G. Ingarao, P.C. Priarone, F. Gagliardi, R. Di Lorenzo, L. Settineri:
“Environmental comparison between a hot extrusion process and conventional
machining processes through a Life Cycle Assessment approach”, Key
Engineering Materials Vols. 622-623 (2014) pp 103-110 © (2014) Trans Tech
Publications, Switzerland, doi:10.4028/www.scientific.net/KEM.622-623.103.
G. Ingarao, P.C. Priarone, F. Gagliardi, R. Di Lorenzo, L. Settineri: “Subtractive
versus mass conserving metal shaping technologies: an environmental impact
comparison”, Journal of Cleaner Production, Vol. 87 (2015), pp. 862-873,
ISSN: 0959-6526.
PC Priarone, M Robiglio, L Settineri: “Milling of Austempered Ductile Iron
(ADI) with recycled carbide tools”, The International Journal of Advanced
Manufacturing Technology, June 2015, in press, doi: 10.1007/s00170-015-73875.
Papers published on National (Italian) Journals
NJ 1.
NJ 2.
NJ 3.
NJ 4.
NJ 5.
NJ 6.
NJ 7.
NJ 8.
NJ 9.
NJ 10.
NJ 11.
NJ 12.
L. Settineri, “Il Crollo del Tagliente di Inserti in Carburo nel Taglio Interrotto”,
Utensil, anno XII, n° 4, pp. 96-97, maggio 1990.
L. Settineri, R. Calzavarini, “Utensili Ceramici Avanzati, Prove di Lavorabilità
su Materiali di Difficile Lavorazione”, Utensil, anno XIII, n° 7, pp. 56-63,
agosto-settembre 1991.
L. Settineri, R. Calzavarini, “Stato dell’Arte degli Utensili Ceramici, un Balzo
in Avanti”, Tecnologie Meccaniche, pp. 260-267, ottobre 1991.
F. Franceschini, L. Settineri: "Carte di Controllo per Diagnostica in Linea delle
Prestazioni di una CMM", in "Gli Speciali di Qualità: Guida alla Metrologia",
Year XXVIII, n.7, (Special n.4 - 98), pp. 72-76, Sept.-Oct. 1998.
R. Ippolito, L. Settineri, A. Barcellona, F. Micari: “Ottimizzazione Numerica e
Sperimentale del Processo di Clinching”, Lamiera, n°2 – anno 37, pp.102-108,
ISSN: 0391-5891 febr. 2000.
R. Ippolito, L. Settineri. A. Barcellona, F. Micari: “L’Assemblaggio Meccanico
a Pressione”, Alluminio e Leghe, anno XII, numero 123, pp. 99-103, ISSN:
1122-1429 June 2000.
S. Tornincasa, L. Settineri, G. Ramieri: “Modellazione Tridimensionale di
Protesi Cranio Maxillo-Facciali”, Il Progettista Industriale, ISSN: 0392-4823,
2000.
L. Settineri, F. Roux: “Hydroforming of a Camshaft: Process and Product
Optimisation”, ATA, Giornale ed Atti della "Associazione Tecnica
dell'Automobile", anno 55, n. 7/8, pp. 250-255, luglio/agosto 2002.
M. Mangialardo, L. Settineri: “Stato dell'Arte sugli Utensili Ceramici”, Utensili
e Attrezzature, Vol III, aprile 2003, ISSN 1123-1092, ed. Tecniche Nuove.
L. Settineri, M.G. Faga, R. Calzavarini, L. Dall’Acqua, F. Cesano:
“Caratterizzazione Sperimentale di Nuovi Rivestimenti in Diamante per Utensili
da Taglio”, Utensili e Attrezzature, Vol. V, giugno 2003, pp. 44-48 ISSN 11231092, ed. Tecniche Nuove.
L. Settineri: “A Favore dell’Ambiente”, Utensili e Attrezzature, Editoriale del
Vol. 2, marzo 2004, pp. 5, ISSN 1123-1092, ed. Tecniche Nuove.
L. Settineri: “Controllare l’Usura dell’Utensile”, Utensili e Attrezzature, Vol. 4,
maggio 2004, pp. 50-53, ISSN 1123-1092, ed. Tecniche Nuove.
NJ 13.
NJ 14.
NJ 15.
NJ 16.
NJ 17.
NJ 18.
NJ 19.
NJ 20.
NJ 21.
NJ 22.
NJ 23.
NJ 24.
NJ 25.
NJ 26.
NJ 27.
NJ 28.
L. Settineri: “I Futuri Sviluppi delle Macchine Utensili”, Utensili e Attrezzature,
Vol. 5, giugno 2004, p. 124, ISSN 1123-1092, ed. Tecniche Nuove.
F. Bucciotti, R. Calzavarini, L. Settineri: “Lavorazioni meccaniche ad alta
velocità”, Macchine Utensili, Vol. 2, febbraio 2006, ISSN 1126-3377.
F. Bucciotti, R. Calzavarini, L. Settineri: “Alta velocità: concetto relativo,
vantaggi certi”, Utensili e Attrezzature, Vol. 5, giugno 2006, pp. 48-52, ISSN
1123-1092, ed. Tecniche Nuove.
L. Filice, S. Rizzuti, D. Umbrello, F. Pulice, L. Settineri: “Simulazione
numerica: previsione usura nei processi di taglio”, Utensili e Attrezzature, Vol.
6, settembre 2006, pp. 56-59, ISSN 1123-1092, ed. Tecniche Nuove.
F. Bucciotti, R. Calzavarini, L. Settineri: “Analisi FEM dei processi di taglio”,
Utensili e Attrezzature, n° 7, ottobre 2006, pp. 42-46, ISSN 1123-1092, ed.
Tecniche Nuove.
E. Atzeni, C. Borsellino, R. Ippolito, E. Lo Valvo, M. Piacentini, V. F. Ruisi, L.
Settineri: “Rivettatura autoperforante e clinching: due tecniche innovative”,
Lamiera, Novembre 2006, pp. 106-112, ISSN 0391-5891, ed. Tecniche Nuove.
F. Bucciotti, R. Calzavarini, L. Settineri: “Tutti i vantaggi dell’alta velocità”,
Stampi, Vol. 10, novembre 2006, pp. 74-78, ISSN 1121-063X, ed. Tecniche
Nuove.
F. Bucciotti, R. Calzavarini, M.G. Faga, L. Settineri: “Rivestimenti utensili:
materiali e tecniche di deposizione”, Utensili e Attrezzature, n° 2, marzo 2007,
pp. 48-54, ISSN 1123-1092, ed. Tecniche Nuove.
F. Bucciotti, R. Calzavarini, L. Settineri: “Utensili per la lavorazione dei
materiali compositi a matrice metallica”, Utensili e Attrezzature, n°3, aprile
2007, pp. 58-62, ISSN 1123-1092, ed. Tecniche Nuove.
F. Bucciotti, L. Settineri: “Rivestimenti multicomponente e multistrato per
applicazioni tribologiche”, Utensili e Attrezzature, n°5, giugno 2007, pp. 62-66,
ISSN 1123-1092, ed. Tecniche Nuove.
L. Settineri: “Rivestimenti per utensili: nanostrutture per megaprestazioni”,
Utensili e Attrezzature, n°8, novembre 2007, pp. 60-66, ISSN 1123-1092, ed.
Tecniche Nuove.
Umbrello D., Bucciotti F., Salmi A., Filice L., Settineri L. (2007) “Modellazione
e simulazione agli elementi finiti dei processi per asportazione di truciolo - Parte
1”. Macchine Utensili, Vol. 11, pp. 48-60.
Umbrello D., Bucciotti F., Salmi A., Filice L., Settineri L. (2008) “Modellazione
e simulazione agli elementi finiti dei processi per asportazione di truciolo - Parte
2”. Macchine Utensili, Vol. 1, pp. 36-41.
L. Settineri, D. Restelli: “La lavorabilità delle leghe di interesse aeronautico”,
Utensili e Attrezzature, n° 9, dicembre 2009, pp. 46-55, ISSN 1123-1092, ed.
Tecniche Nuove.
L. Settineri (2011): “L’Evoluzione Tecnologica nell’Industria Metalmeccanica”,
Giornale Italiano di Medicina del Lavoro ed Ergonomia, 33:3, pp. 234-238,
ISSN 1592-7830, ed. PI-ME Pavia.
F. Klocke, D. Lung, M. Arft, L. Settineri, P.C. Priarone: ”Lavorabilità delle
leghe Alluminio-Titanio”, Utensili e Attrezzature, aprile 2012, Vol. 2, pp. 30-34,
ISSN 1123-1092, ed. Tecniche Nuove.
NJ 29.
NJ 30.
NJ 31.
NJ 32.
NJ 33.
P.C. Priarone, L. Settineri: “L’ottimizzazione degli utensili per la fresatura di
leghe TiAl”, Utensili e Attrezzature, giugno 2013, Vol. 3, pp. 18-22, ISSN
1123-1092, ed. Tecniche Nuove.
P.C. Priarone, L. Settineri: “Esperienze di lubrificazione minimale in fresatura”,
Utensili e Attrezzature, ottobre 2013, Vol. X, pp. 22-26, ISSN 1123-1092, ed.
Tecniche Nuove.
G. Loglisci, P.C. Priarone, L. Settineri: “Fondamenti di sostenibilità per il
manifatturiero”, Utensili e Attrezzature, aprile 2014, Vol. IV, pp. 16-20, ISSN
1123-1092, ed. Tecniche Nuove.
G. Loglisci, M. Robiglio, P.C. Priarone, L. Settineri: “Sostenibilità: Metodi di
Analisi e Indicatori”, Utensili e Attrezzature, settembre 2014, pp. 16-19, ISSN
1123-1092, ed. Tecniche Nuove.
G. Loglisci, M. Robiglio, P.C. Priarone, L. Settineri: “La Valutazione della
Sostenibilità di un Processo Produttivo”, Utensili e Attrezzature, novembre
2014, pp. 18-21, ISSN 1123-1092, ed. Tecniche Nuove.
Papers published in proceedings of International Conferences
IC 1.
IC 2.
IC 3.
IC 4.
IC 5.
IC 6.
IC 7.
IC 8.
A. Masnata, V.F. Ruisi, L. Settineri, “On the Tool Failure Mechanism of
Sintered Carbide Inserts in Interrupted Cutting Operations”, Atti della 4th
International Conference on Metal Cutting, Non-Conventional Machining and
Their Automation, Vol. II, pp. 274-287, 25-27 aprile 1989.
G.E. D’Errico, G. Rutelli, L. Settineri, “Turning Process Monitoring and
Modelling for Adaptive Control Simulation”, Atti della X Conf. On Computer
Aided Production and Engineering, Palermo, 7-9 giugno 1994.
G.E. D’Errico, L. Settineri, R. Calzavarini, “Experiments on Self-Tuning
Regulation of Cutting Temperature in Turning Process”, Atti della Third IEEE
Conf. On Control Application, Glasgow, Vol. 2, pp. 1165-1169, n° di catalogo
IEEE: 94CH3420-7, 24-26 agosto 1994.
G.E. D’Errico, L. Settineri, “Application of a Fuzzy Clustering Technique to
Formation and Scheduling of Part Families and Manufacturing Cells”, Atti della
Third Int. Conf. On Automation, Robotics and Computer Vision (ICARCV ’94)
Singapore, pp. 643-647, 9-11 novembre 1994.
A. Carosi, D. Pocci, L. Iuliano, L. Settineri, “Investigation of Stereolithography
Accuracy on both Solid & Quickcast Parts”, Atti della 5th European Conf. on
Rapid Prototyping and Manufacturing, edited by Dr. P.M. Dickens, Helsinki,
pp. 121-139, ISBN 0 9519759 5 1, June 4th-6th, 1996.
S. Tornincasa, D. Romano, L. Settineri, “Functional Dimensioning and
Tolerancing: a Strong Catalyst for Concurrent Engineering Implementation”,
Atti della 4th Int. Conf. on Advanced Manufacturing Systems and Technology,
Udine, 2-3 settembre 1996.
L. Settineri, “A Heuristic Approach to Process Modelling”, Proc. of IFAC
workshop on Manufacturing Systems: Modelling, Management and Control
MIM ‘97, Vienna, Austria, pp. 367-372, february 3-5, 1997.
L. Iuliano, L. Settineri, A. Gatto: “High-Speed Turning of Metal Matrix
Composites with PCD Coated Carbide Tools”, Proc. of Conf. “Advancing with
Composites ‘97” Milano, may 6th 1997.
IC 9.
IC 10.
IC 11.
IC 12.
IC 13.
IC 14.
IC 15.
IC 16.
IC 17.
IC 18.
IC 19.
IC 20.
IC 21.
L. Iuliano, L. Settineri, A. Gatto: “High-Speed Turning of Metal Matrix
Composites with Coated and Uncoated Carbide Tools”, Proc. of 30th ISATA
Conference, published by Automotive Automation limited, 32a Queen street
Croydon, England, ISBN 0 947719 946 Florence, 1997.
A. De Filippi, L. Settineri, S. Ricca: “Rapid Tooling with Thermal Spray
Deposition”, Proc. of International Conference and Exhibition on Design and
Production of Dies and Moulds ‘97, Istanbul, june 19-21 1997.
S. Tornincasa, L. Settineri: “3D Graphic Reconstruction of CT Images suitable
for Rapid Prototyping Machine”, Proc. of 10th ADM Int. Conf. on Design Tools
and Methods in Ind. Eng., Firenze, Sept. 17-19 1997.
R. Ippolito, L. Settineri, L. Andorno: ”Tool Condition Monitoring by means of a
Neural Network”, Proc. of CIRP Seminar on Intelligent Computation in
Manufacturing Engineering, Capri, (NA), pp. 671-678, July 1-3 1998.
L. Iuliano, L. Settineri, A. Gatto: ”Particles’ Formation and Deposition in the
Sanders RP Process”, Proc. of 7th European Conference on Rapid Prototyping
and Manufacturing, Aachen, July 7-9 1998.
L. Iuliano, L. Settineri, A. Gatto: “Advance in both Rapid Prototyping & Rapid
Tooling Techniques”, Proc. of PRICM, The Third Pacific Rim Int. Conf. on
Adv. Materials and Processing, Honolulu, Hawaii, USA, Vol. I, edited by Imam,
DeNale, Hanada, Zhong, e Lee, pp. 1631-1636, 12-16 Luglio 1998.
L. Iuliano, L. Settineri, A. Gatto: “High Speed Turning and Drilling
Experiments on Metal Matrix Composites”, Proc. of International Colloquium
on Machinability and Damage Mechanisms of Cutting Tools, St. Etienne,
Francia, Nov. 18-19 1998.
A. De Filippi, L. Settineri, S. Moos: “Computer Simulation of a CNC Lathe for
the Teaching of Programming Techniques”, Proc. of Second Assiut University
Int. Conf. on Mechanical Engineering Advanced Technology for Industrial
Production, Assiut, Egitto, March 2-4 1999.
R. Ippolito, L. Settineri, M. Sciamanda: "Vibration Monitoring and
Classification in Centerless Grinding", Proc. of AMST '99, 5th Int. Conf. On
Advanced Manufacturing Systems and Technology, Udine, Italy, pp.187-195,
June 3-4 1999.
S. Tornincasa, L. Settineri, D. Petković, G. Ramieri, S.D. Bianchi: “Rapid
Prototyping and CAD Modelling as the Powerful Tools in Medical
Applications” Proc. of 5th Int. Research/Expert Conf. “Trends in the Dev. Of
Machinery and Associated Technology” TMT 2000, Zenica, Bosnia Erzegovina,
, ISBN 9958-617-06-4, Oct. 5-6 2000.
D. Antonelli, L. Settineri: “A 3D F.E. Model of Clinched Joints Formation and
Traction Failure” Proc. of 9th Int. Conference on Sheet Metal, ISBN 90-7380278-4, Katholieke Universiteit Leuven, Belgium, pp. 221-228, April 2-4 2001.
R. Ippolito, L. Settineri: “Tool Wear Monitoring in Lathe Turning with ARV
Modelling” Proc. of 1st International Seminar on Progress in Innovative
Manufacturing Engineering, PRIME 2001, Sestri Levante, Genova, pp. 21-26,
ISBN 88-900559-0-1, June 20-22 2001.
R. Ippolito, L. Settineri: “Cutting Tool Condition Monitoring with Time-Series
Modelling”, Proc. of 4th International Conference on Quality Reliability
Maintenance QRM 2002, Oxford, edited by G. J. McNulty, Professional
Engineering Publishing, ISBN 1 86058 369 5, pp. 175-178, march 21-22, 2002.
IC 22.
IC 23.
IC 24.
IC 25.
IC 26.
IC 27.
IC 28.
IC 29.
IC 30.
IC 31.
IC 32.
L. Settineri, F. Roux: “Hydroforming of a Camshaft: Process and Product
Optimisation”, Proc. of the 5th Int. ESAFORM Conf. on Material Forming,
Krakow, Poland, april 14-17 2002, (pp. 707-710). ISBN: 83-7108-098-0. Edito
da: M. Pietrzyk, Z. Mitura, J. Kaczmar, Krakow, Polonia, marzo 2002.
R. Ippolito, L. Settineri: “ARV Modelling for Tool Wear Monitoring in
Drilling”, Proc. of the 3rd CIRP Int. Seminar ICME 2002, Ischia, Napoli, 3-5
luglio 2002, pp. 303-308, ISBN: 88-87030-44-8, Ed. Prof. Roberto Teti, 2002.
E. Atzeni, R. Ippolito, L. Settineri: “Numerical and Laboratory Experiments on
Self-Piercing Riveting”, Proc. of the 4th CIRP Int. Seminar ICME 2004,
Sorrento, Italia, 30 giugno - 2 luglio 2004, pp. 305-309, ISBN: 88-87030-79-0.
Stampato da CUES, Fisciano (Salerno), Italia, ed. da Prof. Roberto Teti, 2004.
R. Calzavarini, M.G. Faga, F. Rabezzana, L. Settineri: “Development of
Innovative Drilling and Milling Cutting Tools for Machining of Aeronautic
Materials”, Proc. of the 4th CIRP Int. Seminar ICME 2004, Sorrento, Italia, 30
giugno - 2 luglio 2004, ISBN: 88-87030-79-0. Stampato da CUES, Fisciano
(Salerno), Italia, ed. da Prof. Roberto Teti, 2004.
L. Filice, L. Settineri, D. Umbrello, R. Calzavarini, F. Micari: “Finite Element
Analysis of the Thermo-Mechanical Behaviour of Coated Tools in Mild Steel
Machining” Proc. of the 4th Int. Conf. THE COATINGS in Manufacturing
Engineering, Erlangen, Germania, 5-7 Aprile 2004, pp. 299-307, ISBN: 387525-201-2, ed. da K.-D. Bouzakis, B. Denkena, M. Geiger, H.-K. Toenshoff,
Fr.–W. Bach, U. Popp, 2004.
L. Settineri, S. Bugliosi, G. Gautier di Confiengo, F. Peiretti: “Mechanical
Characterization of Nanocomposite Coatings for Cutting Tools”, Proc. of the 2nd
Int. Conf. on Tribology in Manuf. Processes, ICTMP, Nyborg, Danimarca, 1518 giugno 2004, pp. 293-300, ISBN: 87-91035-12-0. Stampato da: IKON Office
Solutions A/S, Vallensbaekvej 44, dk-Vallensbaek, Danimarca, 2004.
L. Filice, D. Umbrello, F. Micari, L. Settineri: "On the finite element simulation
of thermal phenomena in machining processes", Proc. of the 8th ESAFORM
Conference, Keynote Paper, Cluj-Napoca (Romania), pp. 729-732, April 27-29
2005, ISBN 973 - 27 - 1174 - 4.
L. Filice, D. Umbrello, F. Micari, L. Settineri: "A simple model for predicting
the thermal flow on the tool in orthogonal cutting process", Proc. of the 8th CIRP
International Workshop on Modelling of Machining Operations, Chemnitz, May
10-11, 2005, edited by Prof. Dr. Eng. Reimund Neugebauer, pp. 191-197, ISBN
3-937524-24-X.
S. Durante, A. Gallino, A. Herrmann, M.G. Faga, R. Calzavarini, L. Settineri:
“Integrated Optimization of Cutting Process through Innovative Methodologies
of Simulation”, Proc. of the 8th CIRP International Workshop on Modelling of
Machining Operations, Chemnitz, May 10-11, 2005, edited by Prof. Dr. Eng.
Reimund Neugebauer, pp. 11-15, ISBN 3-937524-24-X.
S. Bugliosi, M.G. Faga, L. Settineri: “Mechanical and Tribological
Characterization of Tools Coatings for Dry Tapping”, Proc. of the 13th
International Scientific Conference on Achievements in Mechanical and
Materials Engineering, AMME 2005, Edited by L.A. Dobrzański, Gliwice,
Wisla, (Poland), pp. 51-54, ISBN 83-89728-11-7, May 16-19 2005.
L. Settineri, A. Zompì, R. Levi: “Numerical & Experimental Metal Cutting
Analisys: an Appraisal”, Proc. of 7th Int. Conference on Advanced
IC 33.
IC 34.
IC 35.
IC 36.
IC 37.
IC 38.
IC 39.
IC 40.
IC 41.
IC 42.
IC 43.
Manufacturing Systems and Technology, AMST 2005, Keynote Paper, Udine,
ISBN-10 3-211-26537-6 SpringerWienNew York, edited by Prof. Elso Kuljanic,
pp. 57-65, June 6-9 2005.
S. Spriano, I. Matekovits, L. Settineri, S. Bugliosi: “Cobalt-free matrixes for
diamond tools and cemented carbides”, Proc. of the 7th International Tooling
Conference. TOOL 06, vol. 2, pp. 439-445, ISBN 88-8202-018-5, Torino 2-5
Maggio 2006.
F. Bucciotti, R. Calzavarini, M.G. Faga, L. Settineri: “Machining Composite
Materials with Diamonds Cutting Tools”, Proceedings of the European Powder
Metallurgy 2006 Congress and Exhibition, Ghent, Belgium, October 23-25
2006, Vol. 3, ISBN 1-899072-34-9, 978-1-899072-34-7, pp. 161-166.
S. Spriano, I. Matekovits, C.L. Bianchi, M.G. Faga, L. Settineri: “Structural,
Morphological and Mechanical Analysis of Innovative Diamond Tools”,
Proceedings of the European Powder Metallurgy 2006 Congress and Exhibition,
Ghent, Belgium, October 23-25 2006, Vol. 3, ISBN 1-899072-34-9, 978-1899072-34-7, pp. 15-20.
R. Calzavarini, L. Filice, L. Settineri, D. Umbrello and F. Micari: “Experimental
campaign to assess numerical simulation of tool wear in orthogonal cutting”,
Proceedings of the HSIMP2007 conference, Senlis, November 13-14 2007,
ISBN 978-2-85400-812-X, proc. on CD.
R. Calzavarini, G. Gautier, B. Previtali, L. Rebaioli, L. Settineri: “Mechanical
Micromachining of Oxide Ceramics”, Proceedings of the 13th International
Research/Expert Conference ”Trends in the Development of Machinery and
Associated Technology” TMT 2009. Hammamet, Tunisia, October 16th - 21th
2009, p. 45-48, ISBN/ISSN: 1840-4944.
E. Atzeni, V. Carlone, R. Ippolito, A. Salmi, L. Settineri: “Sensitivity of
Machining Simulation on Material Model Parameters”, Proceedings of the 12th
CIRP Conference on Modelling of Machining Operations, Donostia-San
Sebastian, May 7th – 8th 2009, vol. 1, p. 115-122, ISBN/ISSN: 978-84-6080865-7.
M.G. Faga, R. Calzavarini, R. Mattioda, L. Settineri: “Hard Metals for Cutting
Tools: Effect of the Preparation Method on the Microstructural and Mechanical
Features”, Proceedings of the 7th Conference on Industrial Tool and Material
Processing Technology. Ljubjana, Slovenia, October 4th – 7th 2009, p. 203-206,
ISBN/ISSN: 978-961-6692-01-4
S. Rizzuti, D. Umbrello, L. Filice, L. Settineri: “Finite element analysis of
residual stresses in machining”, Proceedings of the 13th International
ESAFORM Conference on Material Forming, Brescia - Italy - April 7-9, 2010.
L. Settineri, E. Atzeni, R. Ippolito: “Self piercing riveting for metal-polymer
joints”, Proceedings of the 13th International ESAFORM Conference on
Material Forming, Brescia - Italy - April 7-9, 2010.
F. Klocke, S. Rizzuti, P. Frank, K. Gerschwiler, D. Lung, L. Settineri:
“Experimental and numerical investigation on the delamination behaviour of
PVD-coated tools in turning of austenitic steel”, Proceedings of the 13th
International ESAFORM Conference on Material Forming, Brescia - Italy April 7-9, 2010.
G. Rotella, P.C. Priarone, L. Settineri: “An environmental characterization of
the milling process”, in “ENVIRONMENTAL PROTECTION IN THE NEW
IC 44.
IC 45.
IC 46.
IC 47.
IC 48.
IC 49.
IC 50.
IC 51.
IC 52.
IC 53.
ERA: Proceedings of the 4th International Conference on Sustainable Energy &
Environmental Protection - Part 2”. © DIMeG Politecnico di Bari – SEEP2010,
June 29th - June 2nd, 2010, Bari, Italy. ISBN: 978-88-905185-4-6
G. Rotella, P.C. Priarone, S. Rizzuti, L. Settineri: “Evaluation of the
Environmental Impact of different Lubrorefrigeration Conditions in Milling of
-TiAl Alloy”, in Glocalized Solutions for Sustainability in Manufacturing,
Proceedings book of the 18th CIRP International Conference on Life Cycle
Engineering, Braunschweig, Germany, May 2nd-4th, 2011, pp. 365-370, DOI:
10.1007/978-3-642-19692-8_63, ISBN 978-3-642-19691-1.
P.C. Priarone, S. Rizzuti, L. Settineri: “Cinematic and Dynamic Modelling of
Centerless Grinding”, Proc. of 9th Int. Conference on Advanced Manufacturing
Systems and Technology, AMST 2011, Mali Losinj, ISBN-978-953-6326-64-8,
edited by Prof. Elso Kuljanic, pp. 141-152, June 16-18 2011.
G. Rotella, T. Lu, L. Settineri, O.W. Dillon, I.S. Jawahir: "Dry and Cryogenic
Machining: Comparison from the Sustainability Perspective" Proceedings of 9th
Global Conference on Sustainable Manufacturing, Saint Petersburg, Russia
September 28th – 30th, 2011 pp. 99-104, ISBN 978-3-7983-2375-9.
G. Gautier, V.Tebaldo, L. Settineri, B. Previtali, L. Rebaioli: “Micro-Drilling of
ZTA and ATZ Ceramic Composit: Effect of Cutting Parameters on Surface
Roughness” Proceedings of 1st International Conference on Design and
Processes For Medical Devices, Brescia, Italy, 2-4 May, 2012,
G. Rotella, O.W. Dillon, D. Umbrello, L. Settineri, I.S. Jawahir: “Finite Element
Modeling of Microstructural Changes in Turning of AA7075-T651 Alloy and
Validation”, Proceedings of the North American Manufacturing Research
Institution of the Society of Manufacturing Engineers Volume 40, 2012.
Copyright © 2012 Society of Manufacturing Engineers Dearborn, Michigan,
USA. ISSN: 2161-220X; ISBN: 0-87263-873-1; ISBN 13: 978-0-87263-873-0.
G. Buffa, L. Fratini, F. Micari, L. Settineri: “On the Choice of Tool Material in
Friction Stir Welding of Titanium Alloys”, Proceedings of the North American
Manufacturing Research Institution of the Society of Manufacturing Engineers
Volume 40, 2012. Copyright © 2012 Society of Manufacturing Engineers
Dearborn, Michigan, USA. ISSN: 2161-220X; ISBN: 0-87263-873-1; ISBN 13:
978-0-87263-873-0.
G. Rotella, T. Lu, L. Settineri, I.S. Jawahir: “Machining of AA 7075 Aluminum
Alloy: A Process Optimization for Sustainability”, Proceedings of the 10th
Global Conference on Sustainable Manufacturing, 31/10 – 2/11, 2012, Istanbul,
Turkey.
L. Settineri: “Preface”, Proceedings of the 14th CIRP Conference on Modeling
of Machining Operations, 13-14/06, 2013, Torino, Italy, Procedia CIRP 8(2013)
1-2.
P.C. Priarone, S. Ruffa, J.S. Bedolla, L. Settineri: ”A DoE approach to Hole
Quality Evaluation in Drilling of an Electron Beam Melted Titanium
Aluminide”, Proceedings of the 14th CIRP Conference on Modeling of
Machining Operations, 13-14/06, 2013, Torino, Italy, Procedia CIRP 8(2013)
481-486.
A. Hussain, M. Pavese, L. Settineri, P. Fino, S. Biamino, C.F. Badini, M. R
Abdul Karim, and E. Padovano: “Aluminosilicates assisted pressureless
sintering of sialon ceramics”, Proceedings of the International Conference on
IC 54.
IC 55.
IC 56.
IC 57.
Chemical, Agricultural and Medical Sciences (CAMS-2013), Dec. 29-30, 2013
Kuala Lumpur (Malaysia).
P.C. Priarone, M. Robiglio, L. Settineri, V. Tebaldo: “Milling and turning of
titanium aluminides by using minimum quantity lubrication”, Proceedings of the
CIRP Conference “New Production Technologies in Aerospace Industry - 5th
Machining Innovations Conference (MIC 2014)”, 19-20 November 2014 at the
Hannover Centre for Production Technology (PZH, Garbsen, Germany),
Procedia CIRP 24 ( 2014 ) 62 – 67.
G. Loglisci, P.C. Priarone, L. Settineri: “Development of Sustainable
Manufacturing Indicators Focusing on Human Work and Environment”,
Proceedings of the 5th International Conference on DEVELOPMENT,
ENERGY, ENVIRONMENT, ECONOMICS (DEEE '14) Florence, Italy,
November 22-24, 2014.
P.C. Priarone, M. Robiglio, L. Settineri, V. Tebaldo: “Effectiveness of
minimizing cutting fluid use when turning difficult-to-cut alloys”, Proceedings
of the The 22nd CIRP conference on Life Cycle Engineering, Sydney, Australia,
April 7-9, 2015 Procedia CIRP, Volume 29 (2015), pp. 341-346, DOI
information: 10.1016/j.procir.2015.02.006.
G. Gautier, P.C. Priarone, S. Rizzuti, L. Settineri, V. Tebaldo: “A contribution
on the modelling of wire electrical discharge machining of a γ-TiAl alloy”,
Proceedings of the 15th CIRP Conference on Modelling of Machining
Operations (15th CMMO), Karlsruhe, Germany, June 11-12, 2015, Procedia
CIRP, Volume 31, 2015, Pages 203–208, DOI information:
doi:10.1016/j.procir.2015.03.019.
Papers published in Proceedings of National Conferences.
NC 1.
NC 2.
NC 3.
NC 4.
NC 5.
NC 6.
L. Settineri, “Un Algoritmo per l’Identificazione ed il Controllo Adattativo di un
Processo di Lavorazione per Asportazione di Truciolo”, Atti del I convegno
AITEM, Ancona, pp.45-53, 22-24 settembre 1993.
A. Masnata, L. Settineri, L. Terranova, “Formazione di Celle di Lavorazione e
Famiglie di Parti col Metodo dei Fuzzy Set”, Atti delle Giornate di Lavoro
AIRO 1993, Capri, pp. 282-286, 29 settembre - 1 ottobre 1993.
G.E. D’Errico, L. Settineri, “Programmazione a Logica Sfumata di Celle di
Lavorazione” Atti della Giornata di Studio su Logica Fuzzy e Sistemi Esperti.
Stato dell’Arte e Prospettive Future, Milano, pp. 79-91, 15 novembre 1994.
L. Iuliano, L. Settineri, “Investigation on Cantilever Curl Distortion of
Stereolithographic Parts”, Atti del II° Convegno AITEM, Padova, pp. 93-102,
18-20 settembre 1995.
R. Ippolito. L. Iuliano, L. Settineri, S. Tornincasa, “Le Tecniche di
Fabbricazione per Strati: lo Stato dell’Arte, Prospettive e Applicazioni in
Campo Medicale”, Atti del I° Convegno Nazionale Applicazioni 3D in
Medicina, Visualizzazione tridimensionale e replicazione solida, Torino, 4-6
ottobre 1996.
E. Chirone, L. Settineri, S. Tornincasa, L. Boido: “Prescrizione a Disegno e
Verifica delle Condizioni Funzionali mediante Criteri di Dimensionamento
GD&T”, Proc. of XXVI Nat. Conf. Of the Italian Association for Stress
Analysis, Acicastello (Catania), Sept. 3-6 1997.
NC 7.
NC 8.
NC 9.
NC 10.
NC 11.
NC 12.
NC 13.
NC 14.
NC 15.
NC 16.
NC 17.
NC 18.
R. Ippolito, L. Settineri, A. Barcellona, F. Micari: “Sheet Metal Fastening by the
Clinching Process”, Proc. of III AITEM Conf., Fisciano (Salerno), Sept. 17-19
1997.
L. Iuliano, L. Settineri, A. Gatto: “Advance in both Rapid Prototyping & Rapid
Tooling Techniques”, Proc. of III Aitem Conf. AITEM, Fisciano (Salerno),
Sept. 17-19 1997.
L. Galter, L. Settineri, S. Tornincasa: "Building Process of a Cranial Prosthesis
by means of RP Techniques", Proc. of IV AITEM Conf., Brescia, pp. 55-62,
Sept. 13-15 1999.
F. Franceschini, L. Settineri: “Control Charts for the On-Line Diagnostics of
CMM Performances”, Proc. of IV AITEM Conf., Brescia, pp. 267-280, Sept.
13-15 1999.
M.G. Faga, R. Calzavarini, L. Dall’Acqua, F. Cesano, L. Settineri: “Application
and Characterization of Newly Developed Diamond Coatings for Cutting
Tools”, Atti del VI Convegno AITEM, Gaeta (LT), 8-10 settembre 2003, pp.
583-591, ISBN: 88-89021-01-21. Volume degli Atti pubblicato da D'Arco
Edizioni.
E. Atzeni, R. Ippolito, L. Settineri: “Analysis of the Self-Piercing Riveting
Process”, Atti del VI Convegno AITEM, Gaeta (LT), 8-10 settembre 2003, pp.
281-292, ISBN/ISSN: 88-89021-01-21. Volume degli Atti pubblicato da D'Arco
Edizioni.
S. Bugliosi, L. Settineri, M.G. Faga: “Development of highly wear-resistant
steel knives for wood machining”, Atti del VII Convegno AITEM,
Enhancing the Science of Manufacturing, Lecce, 7-9 settembre 2005, ISBN 88-86406-20-7, EAN - 9788886406208. Volume e CD degli Atti pubblicati da
Carra Editrice, Castrano (LE).
E. Atzeni, R. Ippolito, L. Settineri: “The rivet design in the self-piercing riveting
process”, Atti del VII Convegno AITEM, Enhancing the Science of
Manufacturing, Lecce, 7-9 settembre 2005, ISBN - 88-86406-20-7, EAN 9788886406208. Volume e CD degli Atti pubblicati da Carra Editrice, Castrano
(LE).
G.N. Babini, A. Fedele, R. Ippolito, L. Iuliano, L. Settineri: “Preliminary
study on 3D printing of alumina”, Atti del VII Convegno AITEM, Enhancing
the Science of Manufacturing, Lecce, 7-9 settembre 2005, ISBN - 88-86406-207, EAN - 9788886406208. Volume e CD degli Atti pubblicati da Carra Editrice,
Castrano (LE).
E. Atzeni, C. Borsellino, R. Ippolito, E. Lo Valvo, M. Piacentini, V. F. Ruisi, L.
Settineri: “Rivettatura autoperforante e clinching: due tecniche innovative”,
Convegno di Lamiera: “Lavorazioni non convenzionali della lamiera”, Milano,
29 settembre 2005, organizzato da ed. Tecniche Nuove.
S. Spriano, E. Vernè, I. Matekovits, M.G. Faga, L. Settineri: “Surface
enrichment with tantalum of cobalt alloys for articular prostheses”, Proc. of
IORS 2006- VIII Congresso Nazionale Italian Orthopaedic Research Society,
Bologna, 6 Giugno 2006.
S. Spriano, I. Matekovits, L. Settineri, M. Actis Grande, M. Rosso, “Matrici
metalliche prive di cobalto per utensili da taglio diamantati ed in metallo duro”,
AIM -Materiali sinterizzati ad alte prestazioni, Padova, 14 dicembre 2006.
NC 19.
NC 20.
NC 21.
NC 22.
S. Spriano, L. Settineri, G. Tantussi, S. Bernieri: “Cobalt-Free Metal Matrixes
for Diamond Tools”, In: Convegno Esposizione Carrara Marmotec, Carrara, 30
maggio-2 giugno 2007.
E. Atzeni, R. Ippolito, A. Salmi, L. Settineri: “Sensitivity analysis of model
parameters on finite element simulation of orthogonal cutting”, Proceedings of
8th AITeM Conference, September 10-12th 2007, Montecatini Terme (PT),
ISBN 88-7957-264-4.
P.C. Priarone, S. Rizzuti, G. Rotella, L. Settineri: “Milling Experiments on gTiAl”, Proceedings of 10th AITeM Conference, September 12-14th 2011,
Napoli, ISBN 978-88-906061-0-6.
G. Loglisci, P.C. Priarone, L. Settineri, R. Balaso: “A sustainable approach to
cutting tool manufacturing”, Proceedings of 11th AITeM Conference,
September 09-11th 2013, San Benedetto del Tronto, Italy, ISBN 978-88906061-0-6.
Book Chapters
BC 1.
BC 2.
BC 3.
BC 4.
L. Settineri: “Tipi di Utensile, dalla Progettazione alla Costruzione” in Manuale
degli Utensili, AA.VV., Tecniche Nuove, Milano, ISBN 88 481 1217 X, pp. 73117, 2001.
L. Settineri: “Elenco di Normative Tecniche Relative agli Utensili” in Manuale
degli Utensili, AA.VV., Tecniche Nuove, Milano, ISBN 88 481 1217 X, pp.
1137-1163, 2001.
L. Settineri: “Prove di Durata” in Manuale degli Utensili, AA.VV., Tecniche
Nuove, Milano, ISBN 88 481 1217 X, pp. 1165-1171, 2001.
L. Settineri: “Sistemi di Monitoraggio delle Condizioni di Lavorazione” in
Manuale degli Utensili, AA.VV., Tecniche Nuove, Milano, ISBN 88 481 1217
X, pp. 1261-1300, 2001.
Internal Reports
IR 1.
IR 2.
L. Settineri, “Il Controllo Adattativo nelle Lavorazioni per Asportazione di
Truciolo”, rapporto interno al DTPM, Università di Palermo, settembre 1991.
L. Settineri, “Individuazione In-Process della Rottura dell’Utensile in
Operazioni di Taglio Continuo”, rapporto interno al DTPM, Università di
Palermo, ottobre 1993.
Torino, July 1st 2015
Luca Settineri …………………………