AUTOMATIC MEAT MINCER
Transcript
AUTOMATIC MEAT MINCER
CALL US for FREE advice Tel. +39 0721.831292 - Fax +39 0721.1760103 Email [email protected] en.allforfood.com AUTOMATIC MEAT MINCER - MOD. TCN 90 HP 5 VERT - Production per hour Kg/h 1200/1300 - Tank capacity Kg 34/54 - THREE PHASE supply 230-400/50/3 - EC standards Code: FEL/106602432322 € 5,708.54 (+VAT € 1,255.88) TCN automatic meat mincers are made from grade AISI 304 stainless steel and can be easily cleaned with a spray of water. Their individual motors feature thermal protection. Grade AISI 304 stainless steel mincing set designed for high performances. Spec sheet Automatic meat mincers Mod. TCN 90 HP 5 VERT Meat mincer power Watt/hp 3675/5 Mixer power Watt/hp 1102/1,5 Rpm TC 200 ME 60 Safety switch on lid and head Air pistons allow for self-opening lid Stainless steel IP 67 protection rating controls with reverse gear Standard equipment: Self-sharpening stainless steel blade and disc diameter 6 Page 1 of 2 ALLFORFOOD Srl via caduti sul lavoro 7/a 61032 Fano PU - Italy P.I. 02428350413 Tel. +39 0721.831292 - Fax +39 0721.1760103 Email [email protected] en.allforfood.com CALL US for FREE advice Tel. +39 0721.831292 - Fax +39 0721.1760103 Email [email protected] en.allforfood.com Grade AISI 304 stainless steel structure can be cleaned with a spray of water N. 2 individual three phase motors with thermal protection : Hp 1.5 for mixing paddle/conveyor Hp 5 or Hp 7 for meat mincer Sealed planetary gearbox in oil bath in meat mincer Sealed worm gearbox in oil bath in conveyor Fully grade AISI 304 stainless steel mincing unit Actual production per hour 900/1.100 Kg/h Nominal production per hour 3500 Kg/h meat residues on head interior 50-90 g Stainless steel drive pin tempered steel propeller pin Quick-dismantling tool-free head and paddle Stainless steel stand with castors and break propeller and disc extractor tool use and maintenance manual Available options: stainless steel splash guard pedal-operated control stainless steel partial unger attachment stainless steel total unger attachment safety screen for discs hole size > 8 mm Wide range of specific discs and blades Weight Kg 189 Dimensions cm. L72 x D102 x h185 Page 2 of 2 ALLFORFOOD Srl via caduti sul lavoro 7/a 61032 Fano PU - Italy P.I. 02428350413 Tel. +39 0721.831292 - Fax +39 0721.1760103 Email [email protected] en.allforfood.com