Data Centre Brochure (Italian-English)

Transcript

Data Centre Brochure (Italian-English)
DATA CENTER, TELECOM & BROADCASTING
SKY ITALIA, Milano - Headquarter e Data Center - Edifici 1 e 2
2
BANCA INTESA, Parma - Data center
3
BANCA INTESA, Moncalieri - Data center
4
BANCA INTESA, Settimo Torinese - Data center
5
ENI, Ferrera Erbognone - Green Data Center
6
ERICSSON, Genova - Data Center
8
1
Sky Italia
Headquarter
Edifici 1+2+Link
Rogoredo
(Milano)
6.1
Sky Italia
Headquarters
Buildings 1+2+Link
Rogoredo (Milan)
D AT I D I P R O G E T TO
Superficie dell’edificio:
circa 38.000 mq
Anno di inizio e fine progetto:
2005 - 2006
Anno di inizio e fine cantiere:
2006 - 2008
Cliente ARIATTA: Sviluppo Comparto 3 (SC3) - Gruppo Risanamento
Servizi prestati da ARIATTA: Progettazione Esecutiva e Direzione Lavori
Design Architect: Byron Harford & Associates (Sydney)
Executive Architect: Studio Franzosi+Matricardi (Milano) - arch. Andrea
Matricardi
Ingegneria Strutturale: MSC Associati Srl (Milano) ing. Danilo Campagna
L’architettura del sistema prevede una generazione di emergenza in Media Tensione
ed un sistema di commutazioni incrociate che permettono guasti a più livelli senza
pregiudicare il funzionamento degli apparati secondo uno schema simile ai sistemi
distributivi in Altissima Tensione.
Lato bassa tensione sono invece realizzate configurazioni modulari del tipo a doppio
radiale “A” + “B”.
Il raffreddamento del Data Center, degli ambienti tecnologici e degli Studios è
realizzato da una centrale frigorifera di circa 10 MW su 8 gruppi frigoriferi ad
altissima efficienza energetica. Distribuzione ad anello (per la massima affidabilità e
manutenibilità) e a portata d’acqua variabile.
D E S I G N D ATA
Building area:
about 38.000 sqm
Project start: 2005 - 2006
Project finish: 2006 - 2008
Commissioned by: Sviluppo Comparto 3 (SC3) - Gruppo Risanamento
Services provided by ARIATTA: Detailed design and Site Supervision
Design Architect: Byron Harford & Associates (Sydney)
Executive Architect: Studio Franzosi+Matricardi (Milan)
Architect Andrea Matricardi
Structural Engineering: MSC Associati Srl (Milan)
The system construction foresees Medium Voltage emergency generators and a
cross-switching system, allowing failures to happen at different levels without
compromising the functioning of the equipment and following a scheme that is
similar to the one of High Voltage distribution systems.
In the Low Voltage system double-radial “A” and “B” modular configurations are
foreseen.
The cooling of the Data Center, as in the technological rooms and the Studios, is
provided by a cooling station (about 10 MW) with 8 high efficiency cooling units.
Circular distribution system with variable water load (for maximum reliability and
easy maintenance).
2
Intesa Sanpaolo
D a t a C e n t e r Pa r m a
Pa r m a
6.2
Intesa Sanpaolo
Parma Data Center
Parma
D AT I D I P R O G E T TO
Superficie dell’edificio:
900 mq delle sole Sale Dati
oggetto di ampliamento
Anno di inizio e fine
cantiere: 2005 - 2006
Cliente ARIATTA: Intesa Sanpaolo
Servizi prestati da ARIATTA: AUDIT del Progetto Esecutivo Appaltato e
Direzione Lavori
D E S I G N D ATA
Building area:
900 sqm Data Rooms
interested by the intervention
only
Project finish: 2005 - 2006
Commissioned by: Intesa Sanpaolo
Services provided by ARIATTA: AUDIT of Detailed design for Tender and
Site Supervision
La potenza erogabile in continuità viene triplicata passando da 960+960kW
a 2800+2800kW. L’upgrade riguarda anche il grado di affidabilità del sistema
impiantistico con particolare riferimento alla compartimentazione fisica delle
sorgenti e delle distribuzioni duali.
Tutti gli interventi vengono realizzati senza ripercussioni sull’operatività del centro
elaborativo.
The continuous power is tripled (from 960+960kW to 2800+2800kW). The upgrade
also concerns the system reliability, especially as far as physical partition of sources
and dual distributions is concerned. All interventions are carried out without
interfering with the operational activity of the Data Center.
3
Intesa Sanpaolo
Data Center
Moncalieri
M o n c a l i e r i ( TO )
6.3
Intesa Sanpaolo
Data Center
in Moncalieri
M o n c a l i e r i ( TO )
D AT I D I P R O G E T TO
Superficie dell’edificio:
1.000 mq delle sole Sale Dati
oggetto di ampliamento
Anno di inizio e fine progetto:
2007 - 2008
(3 lotti di progettazione)
Anno di inizio e fine cantiere:
2007 - 2009
(3 lotti di esecuzione)
Cliente ARIATTA: Intesa Sanpaolo
Servizi prestati da ARIATTA: Progetto Esecutivo + Direzione Lavori
Executive Architect: Starching Srl (Mi) - ing. Marcello Cerea
Ingegneria Strutturale: Starching Srl (Mi) - ing. Marcello Cerea
D E S I G N D ATA
Commissioned by: Intesa Sanpaolo
Services provided by ARIATTA: Detailed Design and Site Supervision
Executive Architect: Starching Srl (Mi) - Engineer Marcello Cerea
Structural Engineering: Starching Srl (Mi) - Engineer Marcello Cerea
Building area:
1.000 sqm only for the Data
rooms interested by the
enlargement
Project start: 2007 - 2008
(3 design lots)
Project finish: 2007 - 2009
(3 executive lots)
La potenza erogabile in continuità viene raddoppiata passando da 1280+1280kW
a 2560+2560kW. L’upgrade riguarda anche il grado di affidabilità del sistema
impiantistico con particolare riferimento alla compartimentazione fisica delle
sorgenti e delle distribuzioni duali. Tutti gli interventi vengono realizzati con Data
Center operativo, senza ripercussioni sulla continuità di servizio.
The continuous power is doubled (from 1280+1280kW to 2560-2560kW). The upgrade
also concerns the system reliability, especially as far as physical partition of sources
and dual distributions is concerned. All interventions are carried out while the Data
Center is operational, without interfering with the service continuity.
4
Intesa Sanpaolo
Data Center
S e t t i m o To r i n e s e
S e t t i m o To r i n e s e
( TO )
6.4
Intesa Sanpaolo
Data Center
i n S e t t i m o To r i n e s e
S e t t i m o To r i n e s e
( TO )
D AT I D I P R O G E T TO
Superficie dell’edificio:
1.000 mq delle sole Sale Dati
oggetto di ampliamento
Anno di inizio e fine progetto:
2007 - 2008
(3 lotti di progettazione)
Anno di inizio e fine cantiere:
2007 - 2009
(3 lotti di esecuzione)
Cliente ARIATTA: Intesa Sanpaolo
Servizi prestati da ARIATTA: Progetto Esecutivo + Direzione Lavori
Executive Architect: Starching Srl (Mi) - ing. Marcello Cerea
Ingegneria Strutturale: Starching Srl (Mi) - ing. Marcello Cerea
D E S I G N D ATA
Building area:
1.000 sqm only for the Data
rooms interested by the
enlargement
Project start: 2007 - 2008
(3 design lots)
Project finish: 2007 - 2009
(3 executive lots)
Commissioned by: Intesa Sanpaolo
Services provided by ARIATTA: Detailed Design and Site Supervision
Executive Architect: Starching Srl (Mi) - Engineer Marcello Cerea
Structural Engineering: Starching Srl (Mi) - Engineer Marcello Cerea
La potenza erogabile in continuità viene raddoppiata passando da 1280+1280kW
a 2560+2560kW. L’upgrade riguarda anche il grado di affidabilità del sistema
impiantistico con particolare riferimento alla compartimentazione fisica delle sorgenti
e delle distribuzioni duali. Tutti gli interventi vengono realizzati con Data Center
operativo, senza ripercussioni sulla continuità di servizio.
The continuous power is doubled (from 1280+1280kW to 2560-2560kW). The upgrade
also concerns the system reliability, especially as far as physical partition of sources
and dual distributions is concerned. All interventions are carried out while the Data
Center is operational, without interfering with the service continuity.
5
ENI
Eni Green Dc –
Progetto Zephyr
Fe r r e ra E r b o g n o n e
( Pa v i a )
D AT I D I P R O G E T TO
Superficie dell’edificio:
45.000 mq
Anno di inizio e fine progetto:
2009 - 2010
Anno di inizio e fine cantiere:
2010
6.5
Cliente ARIATTA: Reorder Srl (Milano)
Servizi prestati da ARIATTA: Direzione del Progetto - Progettazione
Esecutiva e Direzione Lavori
Design Architect: POP Solid – Zoran e Dragana Minic
Executive Architect: Starching Srl (Mi) - arch.Paola Pontarollo,
ing. Marcello Cerea
Ingegneria Strutturale: Redesco Srl (Mi) - ing. Mauro Eugenio Giuliani
Project management: Reorder Srl - Starching Srl
Efficienza nel Raffreddamento
- Obiettivo del Progetto: smaltire fino a 30 MW di calore, con punte di concentrazioni
di server molto spinta, oltre i 15 kW/mq termici
- Sistema Primario di raffreddamento: FREE-COOLING DIRETTO ad aria esterna
- per 83% circa dell’anno, in totale raffreddamento con aria esterna diretta
- per 17% utilizzo del sistema di condizionamento
- Sistema Secondario di raffreddamento:
- chiller elettrici centrifughi condensati con acqua di torre, ad alta efficienza
(EER>9)
- Sistema di Storage termico di Emergenza:
- vasche di acqua gelida con capacità di accumulo equivalenti a 2 ore di
raffreddamento del Data Center
- Compartimentazione rigida corridoi caldo/freddo (con CAGE) e separazione dei
flussi d’aria
Efficienza Elettrica
- Continuità: UPS in tecnologia off-line, ad alta efficienza (>99,0%), modulari
(200kW), in ridondanza A+B.
- Studiato per crescere modularmente nel tempo
- Superficie complessiva Sale Dati: 5,200 mq (finale) - 2,600 mq in fase 1
- Potenza massima degli elaboratori: 30 MW (finale) - 6,5 MW in fase 1
- Portata d’aria di raffreddamento finale: 8,640,000 mc/h (+2,880,000 mc/h riserva)
- Portata d’aria di raffreddamento fase 1: 1,440,000 mc/h (+1,440,000 mc/h riserva)
- Potenza frigorifera installata finale: 39 MW (+13 MW riserva)
- Potenza frigorifera installata fase 1: 6,5 MW (+6,5 MW riserva)
- Potenza elettrica da rete finale: 45 MW su 6+6 (A+B) cabine MT/BT con 48 trafo
da 2 MW
- Potenza elettrica da rete fase 1: 11 MW su 3+3 (A+B) cabine MT/BT con 10 trafo
da 2 MW
- Potenza elettrica da UPS finale: 30 MW su 180+180 (A+B) gruppi di continuità
da 0,2 MW
- Potenza elettrica da UPS fase 1: 7,2 MW su 40+40 (A+B) gruppi di continuità
da 0,2 MW
6
ENI
Eni Green Dc –
Zephyr Project
Ferrera Erbognone
(Pavia)
D E S I G N D ATA
Building area: 45.000 sqm
Project start: 2009 - 2010
Project finish: 2010
6.5
Commissioned by: Reorder Srl (Milan)
Services provided by ARIATTA: Project Management, Detailed design and
Site Supervision
Design Architect: POP Solid – Zoran and Dragana Minic
Executive Architect: STARCHING Srl (Mi) - Architect Paola Pontarollo,
Engineer Marcello Cerea
Structural Engineering: Redesco Srl (Mi) - Engineer Mauro Eugenio Giuliani
Project management: Reorder Srl - Starching Srl
Cooling Efficiency
- Project goal: to eliminate up to 30 MW of heat, with high server concentration
peaks, over 15 kW/sqm (thermal)
- Primary cooling system: DIRECT FREE-COOLING working on external air
- cooling totally by direct external air around 83% of the year
- cooling by the air-conditioning system around 17% of the year
- Secondary cooling system:
- high efficiency electric centrifugal coolers (tower water condensation - EER>9)
- Emergency thermal Storage system:
- ice cold water basins with accumulation capacity equal to 2 hours of cooling of
the Data Center
- CAGE for rigorous “hot and cold” partition and airflow separation.
Electric efficiency
- Continuous electricity: off-line technology UPS, which is highly efficient, modular
(200kW), redundancy A+B
Studied to be extended in time in a modular way:
- Data Rooms total area : 5,200 sqm (final) - 2,600 sqm in phase 1
- Maximum processor power: 30 MW (final) - 6,5 MW in phase 1
- Final cooling air load: 8,640,000 m3/h (+2,880,000 m3/h spare)
- Cooling air load - phase 1 : 1,440,000 m3/h (+1,440,000 m3/h spare)
- Final frigorific power installed: 39 MW (+13 MW spare)
- Frigorific power installed - phase 1 : 6,5 MW (+6,5 MW spare)
- Final electric power from network: 45 MW on 6+6
(A+B) MV/LV rooms with 48 x 2 MV transformers
- Electric power from network - Phase 1 : 11 MW on 3+3 (A+B) MV/LV rooms with 10 x
2 MW transformers
- Electric power from UPS - final: 30 MW on 180+180 (A+B) 0,2 MW UPS units
- Electric power from UPS - phase 1: 7,2 MW on 40+40 (A+B) 0,2 MW UPS units
7
Ericsson
Te s t P l a n t
e Data Center
Genova
6.6
Ericsson
Te s t P l a n t
and Data Center
Genoa
D AT I D I P R O G E T TO
Superficie dell’edificio:
circa 20.000 mq
Anno di inizio e fine progetto:
2007 - 2010
Anno di inizio e fine cantiere:
2010
Cliente ARIATTA: J&A
Servizi prestati da ARIATTA: Progettazione esecutiva
Design Architect: Mario Bellini Architect(S) - Milano
Executive Architect: Studio Giancarlo Gnudi - Genova
Ingegneria Strutturale: Proges Engineering - Venosa (Potenza)
ing. Andrea Imbrenda
Realizzazione centrali tecnologiche a servizio delle aree test plant e DATA CENTER e
distribuzione specifica per gli ambienti del processo produttivo Ericsson.
Sistema distributivo dei fluidi vettori del tipo ad anello ridondato.
Sistema elettrico con distribuzione dell’energia normale/preferenziale-continuità e
48 Vcc fino all’utenza.
D E S I G N D ATA
Building area: 20.000 sqm
Project start: 2007 - 2010
Project finish: 2010
Commissioned by: J&A
Services provided by ARIATTA: Detailed design
Design Architect: Mario Bellini Architect(S) - Milan
Executive Architect: Studio Giancarlo Gnudi - Genoa
Structural Engineering: Proges Engineering - Venosa (Potenza)
Engineer Andrea Imbrenda
Realization of technological plants to serve the Test Plant areas and the DATA
CENTER and specific distribution to the Ericsson production process areas. A
redundant loop fluid distribution system is used. Electric system with distribution of
normal/preferential energy (continuous) and 48 Vcc up to the user.
8