GX 160 - Honda Engines
Transcript
GX 160 - Honda Engines
GX 160 Horizontal shaft gasoline (petrol) engine -e ng in es -e u .c om 2.2 kW (3.0 HP) / 3 600 min-1 h w. w w Moteur à essence à arbre de prise de force horizontal Benzinmotor mit horizontaler Kurbelwelle Motore a benzina ad albero orizzontale Bensinmotor med horisontell axel Benzinemotor met horizontale uitgaande as d on a GX 160 237 REDUCTION TYPES 180 DUAL AND SILENT AIR/C 1/2 reduction (L-type) CONTROL BOX CHOKE LEVER 5 +0.030 0 0 17 -0.1 SPEED CONTROL LEVER 53.2 50 34 23 -0.020 STARTER MOTOR 54 CHOKE LEVER ON 21 OFF 106 TOP SPEED FUEL COCK OFF 162 ON SPEED CONTROL LEVER IDLE 54 73 83 20 -0.053 M8x1.25 FUEL COCK LEVER M8x1.25 DEPTH15 (6PLCS) CONTROL BOX 75 66.1 96 162 (STROKE) 121 22 SILENT MUFFLER 89 21 (STROKE) DEFLECTOR FUEL GAUGE STARTER MOTOR 239 250 1/2 reduction with clutch (R-type) 20.5 22 362 123 391 (ALL LENGTH) 215.5 4-M8x1.25 DEPTH16 335 (GX160T2) 35 30 65.1 -0.020 89.7 OIL FILLER CAP 87.3 36 OIL FILLER CAP 65.1 88 96 1/6 reduction (H-type) 162 128.4 106 93 LARGE MUFFLER 35 91.8 0 346 (GX160UT2) 22 -0.053 M8x1.25 18 -0.1 35 35 52.7 50 34 25 +0.036 0 7 304 (S-TYPE) DUAL AND SILENT AIR/C 50 40 156 STD. MUFFLER 377 (ALL LENGTH) 0 16.36 -0.013 317 337 4.724 21 106 45.1 35.7 (W.U-TYPE) 36 (S-TYPE) 5 39.5 OIL DRAIN 80 50 48 31 +0,05 0 106 0 19.05 -0.013 326 (FROM SURF A) 172 (EXHAUST GAS OUT STD.) 161 (EXHAUST GAS OUT LARGE) 201.2 76 35.7 Dimensions Unit: mm (in.) STANDARD TYPE PTO SHAFT DIMENSIONS S-type 53.2 50 35 23 ATT. FACE +0,30 0 0 17 -0.1 -0.20 20 -0.53 M8X1.25 30 65.1 5 106 65.1 Q-type M8x1.25 DEPTH15 5PLCS 0 -0,05 19.843 0 -0.13 (GA DIA) +0.003 0 0 -0.25 19.177 19.177 TAPER 2¼ PER FOOT ATT. FACE 162 88 96 0 ATT. FACE 5/16-24-UNF-2BTAP (5PLCS) 30 65.1 5/16-24-UNF-2BTAP 65.1 106 V-type 16.30 0 -0,1 30 65.1 4.78 61.7 58.5 45.5 17 19.05 -0,025 5/16-24-UNF-2B 162 88 96 16 106 65.1 19.2 33.5 71.7 T-type 162 88 96 5/16-24-UNF-2BTAP (5PLCS) M8 X 1.25 FOR SOME EXCEPTIONAL MODELS Torque 162 (Nm) 11 10 9 (kW) 5 GX 160 NET TORQUE (HP) 88 96 3 5 NET POWER 4 3 2 Output 2 1 1 Recommended operating speed range 0 0 2 500 3 000 2 000 Engine speed (rpm) Continuous Rated Power 3 600 0 -0.025 ATT. FACE 5/16-24-UNF-2BTAP (5PLCS) The power rating of the engine indicated in this document is the net power tested on a production engine for the engine model and measured in accordance with SAE J1349 at a specified rpm. Mass production engines may vary from this value. Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of the engine in application, environmental conditions, maintenance, and other variables. La potenza indicata in questo documento, è la potenza netta rilevata su questo modello di motore in fase di produzione, ed è stata misurata secondo la procedura SAE J1349 ad un numero di giri specifico. Nella produzione di massa si possono riscontrare variazioni rispetto a questi valori. La potenza del motore installato nella macchina può dipendere da numerosi fattori, incluso il numero di giri al quale il motore è impiegato, le condizioni ambientali, dal livello di manutenzione ed altre variabili. La puissance du moteur indiquée dans ce document est une puissance nette obtenue par l'essai d'un moteur de série selon la norme SAE J 1349 à une vitesse de rotation donnée. La puissance d'un autre moteur de production peut être différente de cette valeur indiquée. La puissance réelle d'un moteur installé sur une machine dépendra de différents facteurs comme la vitesse de rotation , les conditions de température, d' humidité , de pression atmosphérique, de maintenance et autres. De bepaling van het vermogen van de motor, vermeld in dit document, is het netto vermogen getest op een productiemotor en gemeten in overeenstemming met SAE J1349 aan een specifieke t/min. Motoren van massaproductie kunnen van deze waarde variëren. Het werkelijke vermogen van de geïnstalleerde motor in het eindproduct kan afwijken, afhankelijk van talrijke factoren, zoals de operationele snelheid van de motor in een applicatie, omgevingsfactoren, onderhoud en andere variabelen. Die Leistungsangabe der in diesem Dokument auf-geführten Motoren ist die Netto-Leistung gemäß SAE J1349, getestet bei einer definierten Drehzahl an einem Produktionsmotor. Bei Motoren aus Serienproduktion kann der Wert abweichen. Die Leistungsabgabe in einem Fertiggerät weicht, bedingt durch unterschiedliche Faktoren, wie Motordrehzahl in der Applikation, Umwelteinflüsse, Grad der Instandhaltung und andere Einflüsse ab. Den i detta dokument nämnda motors effekt, är uppmätt i netto effekt. I enlighet med mätmetoden SAE J1349. Massproducerade motorer kan avvika från nämnda värde. Den faktiska effekten för varje motor kan variera beroende på bl a. varvtal, yttre omgivningar, underhåll, typ av applikation, mm. 6 4 19.05 65.1 25 3/4-16-UNF-2ARH 106 30 65.1 61.7 58.5 22.5 Bore x stroke 68 x 45 mm Displacement 163 cm3 Compression ratio 9,0 : 1 Net power 3.6 kW (4.8 HP) / 3 600 rpm Cont. rated power 2.5 kW (3.4 HP) / 3 000 rpm 2.9 kW (3.9 HP) / 3 600 rpm Max. net torque 10.3 Nm / 1.05 kgfm / 2 500 rpm Ignition system Transistorised Poids à sec 15,1 kg Tipo GX 160 Luftgekühlter 1-Zylinder 4-Takt OHV Motortyp Benzinmotor, um 25° geneigter Zylinder, horizontale Kurbelwelle, Gußeisen Buchse Bohrung x Hub 68 x 45 mm Hubraum 163 cm3 Dati tecnici Modell GX 160 Spezifikationen Couple maximum 10.3 Nm / 1.05 kgfm / 2 500 tr/mn Dimensions (L x l x H) 312 x 362 x 346 mm Dry weight 15,1 kg Verdichtung 9.0 : 1 Tipo di motore Motore monocilindrico OHV ad albero orizzontale, ciclo otto, 4 tempi, cilindro inclinato di 25° raffreddamento ad aria forzata, cilindri in ghisa Alesaggio x corsa 68 x 45 mm Cilindrata 163 cm3 Rapporto di compressione 9.0 : 1 Netto-Leistung 3.6 kW (4.8 HP) / 3 600 min-1 2.5 kW (3.4 HP) / 3 000 min-1 Max. Dauerleistung 2.9 kW (3.9 HP) / 3 600 min-1 Potenza netta 3.6 kW (4.8 HP) / 3 600 giri/min Potenza nominale continua Max. Netto-Drehmoment 10.3 Nm / 1.05 kgfm / 2 500 min-1 2.5 kW (3.4 HP) / 3 000 giri/min 2.9 kW (3.9 HP) / 3 600 giri/min Coppia massima 10.3 Nm / 1.05 kgfm / 2 500 giri/min Zündsystem Elektronische Zündung Accensione A transistor senza contatti Zugstarter (Elektrostart Sonderausstattung) Avviamento Tankinhalt 3.1 Liter Autoavvolgente (elettrico opzionale) Capacita’ serbatoio 3.1 Litri Benzinverbrauch bei 1.4 L/h - 3 600 min-1 Dauerleistung Consumo di combustibile 1.4 Litri/ora - 3 600 giri/min alla potenza continuativa Motorölkapazität 0,6 Liter Capacita’ coppa olio 0,6 Litri Maße (L x B x H) 312 x 362 x 346 mm Dimensioni (Lu x La x A) 312 x 362 x 346 mm Trockengewicht 15,1 kg Peso a secco 15,1 kg Modell GX 160 Luchtgekoelde 4-takt OHV benzinemotor, Motortype 25° hellende cilinder, horizontale uitgaande as, gietijzeren cylinderbus Boring x slag 68 x 45 mm Cilinderinhoud 163 cm3 Compressie 9,0 : 1 Netto vermogen 3.6 kW (4.8 HP) / 3 600 t/min Continu nominaal 2.5 kW (3.4 HP) / 3 000 t/min vermogen 2.9 kW (3.9 HP) / 3 600 t/min Max. netto koppel 10.3 Nm / 1.05 kgfm / 2 500 t/min Ontsteking Electronische ontsteking Repeteerstarter Startsysteem (electrische start optioneel) Specifikationer Model GX 160 Specificaties Puissance en 2.5 kW (3.4 HP) / 3 000 tr/mn service continu 2.9 kW (3.9 HP) / 3 600 tr/mn Capacité d’huile moteur 0.6 l Engine oil capacity 0.6 l Luftkyld 4-takts bensinmotor med överMotortyp liggande ventiler, 25° lutande cylinder, Horisontal axel, cylinderfoder i gjutjärn Cylinderdiameter x slaglängd 68 x 45 mm Slagvolym 163 cm3 Kompressionsförhållande 9,0 : 1 Netto effekt 3.6 kW (4.8 HP) / 3 600 varv per minut Rek. kontinuerlig effekt 2.5 kW (3.4 HP) / 3 000 varv per minut 2.9 kW (3.9 HP) / 3 600 varv per minut Max. netto vridmoment 10.3 Nm / 1.05 kgfm / 2 500 varv per minut Tändsystem Transistor Startsystem Startapparat (elektrisk start som tillval) Tankvolym 3.1 Liter Tankinhoud 3.1 Liter Brandstofverbruik aan 1.4 l/u - 3 600 t/min cont. nominaal vermogen Bränsleförbrukning vid 1.4 L/tim - 3 600 varv per minut kontinuerlig märkeffekt Oljevolym 0.6 Liter Motoroliecapaciteit 0.6 Liter Afmetingen (L x B x H) 312 x 362 x 346 mm www.honda-engines-eu.com Puissance nette 3.6 kW (4.8 HP) / 3 600 tr/mn Consommation de carburant 1.4 litre(s)/heure - 3 600 tr/mn en service continu Dimensions (L x W x H) 312 x 362 x 346 mm Langerbruggestraat 104 B-9000 Gent TEL: + 32 (0)9 250 12 11 FAX: + 32 (0)9 250 14 24 Cylindrée 163 cm3 Taux de compression 9,0 : 1 Cap. du réservoir d’ess. 3.1 l Fuel cons. at cont. 1.4 L/hr - 3 600 rpm rated power Honda Motor Europe Logistics NV Alésage x course 68 x 45 mm Système de démarrage Lanceur à rappel (démarr. électr. en option) Starting system Recoil Starter (electric start optional) Drooggewicht 15,1 kg Moteur à essence monocylindre 4 temps OHV, refroidissement à air, cylindre incliné 25°, arbre de prise de force horizontal, cyl. chemisé en fonte Système d'allumage Transistorisé Fuel tank capacity 3.1 l Starter Type du moteur Dimensioner (L x B x H) 312 x 362 x 346 mm Torrvikt 15,1 kg Honda Engines – France Honda Motor Europe Ltd Succursale France • Parc d’Activités de Pariest • Allée du 1er Mai, BP 46 • Croissy Beaubourg F-77312 Marne-la-Vallée Cedex 2 • TEL: + 33 (0)1 60 37 32 45 • FAX: + 33 (0)1 60 37 33 47 Honda Engines – Germany Honda Deutschland Ndl. der HME Ltd. • Hanauer Landstraße 222-224 • D-60314 Frankfurt TEL: + 49 (0) 69 8309 (0) 365 • FAX: + 49 (0) 69 8309 (0) 128 Honda Engines – Italy Honda Motor Europe Logistics NV • Via Strà 153-154 • I-37030 Colognola ai Colli (VR) TEL: + 39 045 6173341 • FAX: + 39 045 6151270 Honda Engines – Sweden Honda Motor Europe Ltd Filial Sverige • Box 31002 • SE-200 49 Malmö TEL: + 46 40 38 07 00 • FAX: + 46 40 38 07 05 Honda Engines – United Kingdom Honda Motor Europe Logistics NV • Viscount Way, South Marston Park • Swindon SN3 4TN, UK TEL: + 44 (0) 1455 559429 • FAX: + 44 (0) 1455 559428 Honda Engines – Russia Representative office of Honda Motor Europe Logistics in Russia Building 1, Pridorozhnaya Street, Sharapovo settlement, Marushkinsky District • 143350 Moscow, Russian Federation TEL: + 7 (495) 745 2080 • FAX: + 7 (495) 745 2081 Le specifiche sono sogette a cambiamento senza peavviso. All specifications are subject to change without notice. Die Spezifikationen können ohne Vorankündigung geändert werden. Les caractéristiques techniques peuvent être modifiées à tout moment et sans préavis. Alle technische specificaties kunnen op elk ogenblik en zonder kennisgeving gewijzigd worden. Specifikationerna kan ändras utan föregående meddelande. Air cooled 4-stroke OHV petrol engine, Engine type 25° inclined cylinder, horizontal shaft, cast iron sleeve HMEL - TS GX160 - 7949 Jan. 2014 - Printed in Belgium Modèle GX 160 Spécifications techniques Specifications Model GX 160
Documenti analoghi
GX 390 - Honda Engines
Honda Engines – France
Honda Motor Europe Ltd Succursale France • Parc d’Activités de Pariest • Allée du 1er Mai, BP 46 • Croissy Beaubourg
F-77312 Marne-la-Vallée Cedex 2 • TEL: + 33 (0)1 60 37 32...
GX 270 - Honda Engines
Representative office of Honda Motor Europe Logistics in Russia
Building 1, Pridorozhnaya Street, Sharapovo settlement, Marushkinsky District • 143350 Moscow, Russian Federation
TEL: + 7 (495) 745 ...